Preparations for using the UA-1000

7

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

8

Click the Windows start button. From the menu that appears, select

“Run...”

The “Run...” dialog box will appear.

fig.2-3

9

In the dialog box that appears, input

the following into the “Open” field,

and click [OK].

(drive name) :\Driver\USB_XP\SETUPINF.EXE

*In the explanatory example shown here, the drive name is given as “D:”. The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

10

The SetupInf dialog box will appear.

You are now ready to install the driver.

11

Use the USB cable to connect the UA-1000 to your computer.

1.With the power switch turned OFF, connect the power cord to the UA-1000.

2.Connect the power cord to an electrical outlet.

3.Use the USB cable to connect the UA-1000to your computer.

12

Set the UA-1000’s power switch to the ON position.

Near the task bar, your computer will indicate “Found New Hardware.” Please wait.

13

The Found New Hardware Wizard will appear.

Select “Install from a list or specific location (Advanced),” and click [Next].

If the screen indicates

“Windows can perform the same action each time you insert a disk or connect a device with this kind of file,” click [Cancel].

To check the drive name Click the start button, and choose My Computer from the menu that appears. In the window that appears, check the drive name of the CD- ROM drive into which you inserted the CD-ROM in step

7.The drive name is the (D:) or (E:) displayed by the CD-ROM drive.

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

19