Basic connections and settings

Monitoring 5.1 channel sound

fig.51ch

5.1ch speaker

system

ALL

●Connections

Connect phone jack audio cables to the output jacks.

●Output volume select switch

Press the output volume select switch to select ALL (lit).

●Output volume knob

Use the knob to adjust the volume level of signal that is output from the output jacks.

●UA-1000 internal patching

Set patch bay as follows in UA-1000 Control Panel.

*For details on UA-1000 Control Panel, refer to “Various settings” (p. 36).

In the PATCH BAY area of UA-1000 Control Panel set OUTPUT 1-2to WAVE OUT 1-2, OUTPUT 3-4to

WAVE OUT 3-4,OUTPUT 5-6 to WAVE OUT 5-6.

Settings in Windows

1.From the Windows Control Panel, open Sound and Audio Devices Properties. (->“Input/output device settings” (p. 24))

2.Click the Audio tab.

In Sound Playback, click the Default Device field, and choose EDIROL UA-1000from the list that appears.

3.In Sound Playback, click [Advanced].

4.Click the Speakers tab.

Select 5.1 surround sound speakers as Speaker setup.

5.Click [OK] to close the Advanced Audio Properties dialog box.

6.Click [OK] to close the Sounds and Audio Devices Properties dialog box.

*In your software, select 6-speaker mode, 5.1 ch surround sound mode, etc.

31