Edirol UA-1000 Block diagram, ■Factory settings

Block diagram

■Factory settings

INPUT MONITOR (DIRECT MONITOR)

			SOFT CTRL					WAVE OUT
			OFF(BYPASS)					MONITOR

Contents

Owner’s Manual IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Page Page IMPORTANT NOTES Handling CD-ROMs Copyright Contents Main features Contents of the package Attaching the rackmount adaptors Attaching the Ferrite Core Panel Descriptions Front panel 1.Combo input jacks 1–4 2.Input sensitivity knobs 3.Phantom power switches 1, 2 (PHANTOM 48 V) 5.Input peak indicators 6.Input impedance select switch 7.Output indicators 8.ADAT mode switch 9.External clock switch 10.Sampling frequency select switch 11.STEREO/MONO select switch (Direct monitor section) 12.Direct monitor soft control switch (Direct monitor section) 13.Direct monitor volume (Direct monitor section) 14.Output volume select switch 15.Output volume knob 16.Headphone jack 17.Output level indicators 18.Power indicator Rear panel 20.AC inlet 21.MIDI IN/OUT connectors 22.WORD CLOCK IN/OUT jacks 23.USB connector 27.Insertion / Input jacks 1–4 28.Insertion / Input jack select switches 29.Output jacks 1–8(phone) for UK except for UK Preparations for using the UA-1000 Installing the driver Preparations for using the UA-1000 start “Run...” “Open” power switch “Please choose your search and installation options.” “Model” “EDIROL The screen will indicate “Completing the Found New Hardware Wizard.” System Settings Change Giving priority to background services Driver settings Audio device MIDI device Input/output device settings Open the Sounds and Multimedia Properties dialog box Audio Sounds and Multimedia Properties dialog box Check whether there is sound SampleSong TTears(.mp3) Play About the demo songs Basic connections and settings Basic connections About the sampling frequency select switch Recording a mic or guitar ●Input sensitivity knob ●Output volume select switch ●Other cautions Recording onto an external ADAT device Capturing sound from an external ADAT device Monitoring 5.1 channel sound Inserting an external effects processor Recording a digital input signal Synchronizing to the word clock input Using an external device as the master Various settings Internal blocks of the UA-1000 UA-1000Control Panel Various settings Screen items and what they do Main window WAVE IN OUTPUT WAVE IN PATCH BAY OUTPUT PATCH BAY INPUT MONITOR (DIRECT MONITOR) WAVE OUT MONITOR Device Panel Examples of use Adjusting the audio latency Using ASIO Direct Monitor Synchronization settings About the ADAT mode switch and external clock switch ADAT Output mode ADAT Input mode Internal blocks in ADAT input mode ■External clock switch System settings Restoring the factory settings (Factory Reset) Troubleshooting Problems related to the USB driver Deleting the driver Problems related to the UA-1000 Sound from devices connected to the input jack is not heard in the headphones ●Is the headphone volume set appropriately ●Is the rear panel insertion/input jack select switch set appropriately ●If you are using digital input, turn the External clock switch on Volume from a device connected to the input jacks is too low Sound is interrupted during audio playback ●The sound may be interrupted if a LAN is operating ●Are many applications running on your computer ●Try installing more memory ●Does your computer satisfy the requirements of the USB2.0 standard Cubase SX Main specifications Block diagram ■Output volume select switch: MAIN ■Output volume select switch: ALL INDEX INDEX FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTICE AVIS DECLARATION OF CONFORMITY Information