Basic connections and settings

Recording onto an external ADAT device

fig.adat-out

INPUT

Optical cable

OPTICAL OUT

●Connections

Connect an optical cable from the OPTICAL OUT jack.

●Sampling frequency select switch

Select either 44.1 kHz or 48 kHz.

●ADAT mode switch

Press the ADAT mode switch to turn it on.

*By pressing the external clock mode switch in ADAT mode, you can use ADAT Output mode to synchronize the word clock or digital input to an external device.

If you turn on the external synchronization mode switch when using ADAT output mode, the output to the

ADAT will be synchronized to the word clock from the external device or to the clock of the digital input.

fig.adat-out2

INPUT

OPTICAL OUT

WORD CLOCK IN

*If the word clock input connector and the digital input connector are both connected, the word clock input connector will take priority for synchronization.

29