Various settings
Reading and writing memories
Five sets of
For the procedure, refer to README_E.HTM on the included
Convenient ways to use the OUTPUT PATCH BAY
You can store two different settings for the OUTPUT PATCH BAY, and switch between these two settings.
DIRECT MONITOR: ON
If even one INPUT MONITOR (DIRECT MONITOR) switch is ON, the DIRECT MONITOR: ON settings of the OUTPUT PATCH BAY
will be used.
*These settings will always be used if the Direct Monitor Soft Control switch of the
DIRECT MONITOR: OFF
If all of the INPUT MONITOR (DIRECT MONITOR) switches are
OFF, the DIRECT MONITOR: OFF settings of the OUTPUT PATCH
BAY will be used.
Examples of use
Simply by switching INPUT MONITOR (DIRECT MONITOR) on/off, you can switch between settings for monitoring and settings for mastering.
Settings for monitoring
These settings are appropriate when you want to hear the sounds being input to the
Settings for mastering
These settings are appropriate when you have finished acquiring audio from the input jacks, and are mastering the data on your computer.
39