2. CABLE CONNECTION
17
Priority setting Performance
1 If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was
Signal 2.
2 If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active input was
Signal 1..
Manual The monitor will not detect signals automatically in this mode. Select the
active input by pressing the Input Signal Selection Button on the monitor's
control panel.
NOTE
• When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are
in power saving mode.