Eizo CE210W, CE240W 6. ATTACHING AN ARM

32

6. ATTACHING AN ARM

6. ATTACHING AN ARM

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to

the LCD monitor.

NOTE

• If you will use the arm or stand of other manufacturers, conﬁrm the followings to the manufacturers

before selecting.

- Hole spacing on the arm mounting

CE210W : 100 mm x 100 mm (VESA compliant)

CE240W : 100 mm x 100 mm (VESA compliant) or 200 mm x 100 mm (VESA compliant)

- Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such

as a cable

- TÜV/GS approved arm or stand

• Please connect cables after attaching an arm stand.

• This monitor does not support the portrait display.

Setup Procedure

1

Lay the LCD monitor down. Do not scratch the panel.

2

Remove the tilt stand by loosening the screws

Unscrew the four screws securing the unit and the satand with the screwdriver.

3

Attach an arm stand to the LCD monitor securely.

Secure the monitor to the arm or stand using the screws speciﬁed in the user's

manual of the arm or stand.

CE210W

4 Mounting Screws (enclosed): M4 x 12 mm

Arm-Stand:

Contents

Main Important SAFETY SYMBOLS CAUTION PRECAUTIONS IMPORTANT! [Location of the Caution Statements] OK OK WARNING CAUTION OK LCD Panel 1. INTRODUCTION 1-1. Features CE210W CE240W 1-2. Package Contents 1. INTRODUCTION 1-3. Controls & Connectors Front (5) (1) Page 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before Connecting Analog Input Resolution Frequency Dot Clock Remarks Digital Input 2-2. Connecting the Signal Cable Analog Input Digital Input Plug the power cord into the power connector on the rear of the monitor. Plug the other end of the power cord into a power outlet. Lead the power cord and signal cable into the cable holder at rear of the monitor. Adjust the "height", "front and back position" and "angle" of the monitor. Page 2-3. Connecting Two PCs to the Monitor Connecting Examples Selecting the Active Input Page 3. ScreenManager 3-1. How to use the ScreenManager Entering the ScreenManager Making Adjustments and Settings Exiting the ScreenManager 3-2. ScreenManager Adjustments and Settings 3-3. FineContrast This function allows you to select the best suited mode for screen display. To select the Mode Exit Color Adjustment of the Mode Settings Detailed Adjustments 3-4. Useful Functions Adjustment Lock [How To lock] [How To unlock] Off Timer Page 4. ADJUSTMENT 4-1. Screen Adjustment Analog Input Adjustment Procedure Touch the Auto Adjustment Switch on the control panel. Adjust by using <Screen> menu in the ScreenManager. Adjust the output signal range (Dynamic Range) of the signal. [Procedure] 4-2. Displaying Lower Resolutions Enlarge the screen size when displaying a low resolution. CE210W CE240W Smooth the blurred texts of the enlarged screen. 4-3. Color Adjustment Adjustment Items Page 4-4. Power-save Setup Analog Input [Power Saving System] Digital Input [Power Saving System] 5. MAKING USE OF USB (Universal Serial Bus) Required system environment Connecting to the USB HUB Connect the monitor to the PC with the signal cable rst, then turn on the PC. Page 6. ATTACHING AN ARM Page 7. TROUBLESHOOTING Page Page 8. CLEANING Cabinet LCD Panel 9. SPECIFICATIONS Page Default settings Beeper settings Page <CE240W> mm (inch) 25 172 172 Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal USB Port No. Signal Remarks 10. GLOSSARY Page 11. APPENDIX/ANHANG/ANNEXE 11. APPENDIX/ANHANG/ANNEXE 11. APPENDIX/ANHANG/ANNEXE Page For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice