English
nSpecifications of the analog RGB input terminal of this product. Signal allocation
5 4 3 2 1
Video signal: Analog 0.7V
10 9 8 7 6Horizontal synchronized signal: TTL level (Positive/negative polarity) Vertical synchronized signal: TTL level (Positive/negative polarity)
15 14 13 12 11
DSUB 15P shrink terminal (Female)
Pin assignment
Pin No. Name
1Video signal (Red)
2 Video signal (Green)
3 Video signal (Blue)
4N.C
5 GND
Pin No. Name
6GND (Red)
7 GND (Green)
8 GND (Blue)
9N.C
10 GND
Pin No. Name
11GND
12N.C
13Horizontal syn- chronized signal
14Vertical synchro-
nized signal
15N.C
SETTING UP
(3) Connecting to the unit with a composite video input terminal equipped.
Connect a commercially available RCA pin plug video cable to the [VIDEO OUT] terminal on the rear panel.
(4) Connecting to the PC with a USB cable.
Connect the supplied or commercially available USB cable to the [USB] terminal on the rear panel.
N o t e
•We recommend using a USB 2.0 compliant USB cable.
•If you plug into a USB connector with the power on, the PC may not recognize this device.
•Depending on the USB environment used by the PC or peripheral equipment using the USB 2.0 compliant cable, image transfer may be disrupted.
•Operation is not guaranteed for all environments.
(5)Connecting the AC adapter.
Connect the DC plug of the supplied AC adapter to the [DC IN 12V] terminal on the rear panel before inserting the AC adapter in an outlet.
N o t e
•Only one image can be output at a time; either [RGB OUT] or [VIDEO OUT]. For more information on switching the image output, refer to "RGB/Video Switch". P.15
•To protect the unit and peripheral devices, unplug the power plug and the AC adapter, and turn off all other devices before connecting the video cable.
•When plugging in or unplugging the power plug, the AC adapter, or video cable, hold the plug of the cable.
31
