English
Presentation using printed materials, etc. (Using the stage)
You can give an effective presentation by using the supplied stage, magnetic sheet, and anti- glare sheet.
nSetting the main unit
Attach the stage to the main unit in the specified position as shown in the figure above. Then connect the main unit to a projector or a PC monitor, and turn on the power for the main unit.
•To prevent the printed materials, etc. from moving, use the supplied magnetic sheet to properly fix the printed materials, etc. on the stage.
nAdjusting the size
Place an object on the stage, and then adjust the zoom dial on the main unit or the zoom
buttons [ 
/ 
] on the remote control so that the part you want to shoot fits the screen size. P.49
nAdjusting the focus
Press the [AF] button on the main unit or on the remote control to focus the camera on the object. P.50
nAdjusting the brightness
Press the [BRIGHTNESS 
]/[BRIGHTNESS 
] buttons on the operating panel or on the remote control to adjust the image brightness. P.53
nTurning the illumination lamp ON/OFF
Move the illumination lamp switch on the main unit to the left/right to turn it ON/OFF.
N o t e
•When shooting glossy documents etc., the images may be hard to see due to glare etc. In this case, place the supplied
OPERATION PROCEDURE
35
