OPERATION PROCEDURE
English
4 OPERATION PROCEDURE
Presentation using printed materials, etc.
nSetting the main unit
Set the main unit as shown in the figure above. Then connect it to a projector or a PC monitor, and turn on the power for the main unit.
nAdjusting the size
Place an object on the stage, and then adjust the zoom dial on the main unit or the zoom
buttons [ 
/ 
] on the remote control so that the part you want to shoot fits the screen size. P.49
nAdjusting the focus
Press the [AF] button on the main unit or on the remote control to focus the camera on the object. P.50
nAdjusting the brightness
Press the [BRIGHTNESS 
]/[BRIGHTNESS 
] buttons on the operating panel or on the remote control to adjust the image brightness. P.53
nTurning the illumination lamp ON/OFF
Move the illumination lamp switch on the main unit to the left/right to turn it ON/OFF.
N o t e
•Before connecting the main unit to other devices, be sure to turn off the power for all of the devices.
•When copying B&W characters or documents etc., use TEXT1 to 3 from the OSD (Camera image) as the image mode.
A better image may be produced by selecting Graphics1 mode with DLP projector.
•When connected to a DLP projector, select the image mode according to the displayed image as both text and photos can be beautifully reproduced by switching to Graphics2 mode.
34
