English
Shooting a 3-D object
Adjust
Adjust
Adjust
By adjusting the angle of the camera column and the camera head, a
nSetting the main unit
Connect the main unit to a projector or a PC monitor, and then turn on the power for the main unit. Adjust the angle of the camera column and the camera head as shown in the above figure to shoot the
nAdjusting the size
Adjust the zoom dial on the main unit or the zoom buttons [ 
/ 
] on the remote control so that the part of the object you want to shoot fits the screen size.
nAdjusting the focus
Press the [AF] button on the main unit or on the remote control to focus the camera on the object. In cases where the object cannot be brought into focus, select [Focus] from the
OSD and use [Manual] to focus. P.50
N o t e
•The focus can be achieved from 50mm - 
.
nAdjusting the brightness
Press the [BRIGHTNESS 
] and [BRIGHTNESS 
] buttons on the main unit to adjust the image brightness. P.53
nTurning the illumination lamp ON/OFF
Move the illumination lamp switch on the main unit to the left/right to turn it ON/OFF.
OPERATION PROCEDURE
47
