Manuals / Elmo / Photography / Digital Camera

Elmo P100 instruction manual Set USB Mode to Application on the OSD

Models: P100

1 48

Download 48 pages 6.12 Kb

Page 29

ENGLISH

Presentation using the supplied software with the USB-connected PC

Set [USB Mode] to [Application] on the OSD.

"Utility Software" is available from the supplied CD-ROM supplied from us.

"Utility Software" contains PC link software "Image Mate for Presentation" and TWAIN driver "ELMO TWAIN DS" (VHN) to allow the following operation:

•Transfer of moving/still images to the PC

•Operation of this product from the PC

A PC that Microsoft Windows2000 (SP4 or newer) or XP (SP2 or newer) has been installed is recommended.

For details, refer to the "Utility Software" Installation Manual and the help folder with the software.

When the front operating panel or the wireless remote control is in operation, do not connect/ disconnect the USB cable, or malfunction will be caused to this product.

The USB cable compliant with USB2.0 is recommended.

When this camera is connected with the PC with a USB cable, the camera image frame rate lowers.

Depending on the USB environment used by the PC or the influence of peripheral units, the video transfer could be disturbed.

This does not guarantee the normal operation in any environment.

OPERATION PROCEDURE

78

Image 29

Elmo P100 instruction manual Set USB Mode to Application on the OSD

Contents

P100 Important Safeguards Should be moved with care. Quick Risk Electric Shock Do not Open Wash hands after handling 30%~85% No condensation Before YOU USE Part Names Setting UP Storing Operation Procedure Functions Contents Troubleshooting Name of Each Part Part Names and FunctionsAppearance Front Rear/Side Front Front Operating Panel FunctionsName Function Use this button to display materials such as documents Name Rear Panel Side Panel To enable the image transfer or the main unit control by OSD On-Screen Display Camera Mode Menu when camera image is in display Sample image of the 1st, 2nd and 3rd hierarchies SD Mode Menu when image stored in an SD card is in display Indicates the factory settings @4 @5 @6 @7 Wireless Remote Control @0Text Text Mode To switch the mode to Text1 2adjustment Dark To darken the camera imageTo switch ON/OFF the lighting Normal Normal Receivable Range Battery Change Release the lock by turning the security lock Setting UPSetting Up English Connecting to the PC with a USB cable Connecting of Video CablesConnecting to the unit having the DVI input terminal Connecting to the unit having the analog RGB input terminal GND Pin assignment Slides down and the lamp column also folds StoringStoring Presentation by Using Documents, Films, etc Operation ProcedureZoom on the front operating panel or the zoom button Press the Brightness · Presentation using optional SD card Option Displaying the image Saving the ImageMovement as shown in the right figure Direction buttons Formatting the SD card Deleting the ImageSlide show Set USB Mode to Application on the OSD IMAG0002.JPG 100ELMO IMAG0001.JPG Forward shooting Backward shooting Shooting off the stage This camera is equipped with material illumination Lighting Zoom Image Selection Cannot be switched to RGB in image VGA2 VGA1VGA3 SXGA1 Auto Focus Focus on the object is adjustedFocus Manual Focus Auto Brightness Adjustment Brightness AdjustmentManual Brightness Adjustment Normal is selected in Brightness on Calling State PresettingPresetting Cable Connection RS-232C SpecificationsConnect this product to a PC with an RS-232C cable This product side DSUB-9P Operation Command PC → This product Data Format SpecificationResponse Data Format This product → PC ACK Uart Communication Format Transmission Specifications BWD TEXT1 TEXT2 TEXT3 ConnectionGraphics Replacement of Lighting Lamp Fluorescent Lamp TroubleshootingSymptoms and Confirmation General Specifications Analog RGB output Vp-p 75Ω unbalanced Main Camera50Ω Terminated Trademark Acknowledgements Supplied AccessoriesLighting