92
ABOUT
RS-232C
ENGLISH
Function
Command
Parameter Data Contents
Slide-show image SE 0 (Left to right) ■■ To set the visual effect of the slide show
feed effect 1 (LT to RB)
2 (RT to LB)
3 (None)
Slide-show object ST 0 (All) ■■ As a slide show target, select all images stored on
file 1 (Locked) the SD card or only the locked image files
Slide-show feed SO 0 (FWD) ■■
To set whether the slide show should be proceeded
order 1 (BWD)
in the ascending order or in the descending order
Slide-show image SI 0 (3s) ■■ To set the interval of the image switching in the
feed interval 1 (5s) slide show
2 (10s)
3 (15s)
4 (30s)
Slide-show repeat SR 0 (OFF) ■■ To proceed the slide show repeatedly
1 (ON)
File delete DE 0 (Current) ■■ To delete an image file in the SD card
1 (All)
File lock SL 0 (Current) ■■ To lock an image file in the SD card
1 (All)
File unlock SU 0 (Current) ■■ To unlock the locked image file in the SD card
1 (All)
Format SF 0 ■■ To format the SD card
Image save CA 0 ■■ To save the image in the SD card
USB mode UM 0 (Mass Storage) ■■ To switch the USB mode
1 (Application)
Gamma setting GM 0 (High) ■■ To set the gamma value of the image
1 (Normal)
2 (Low)
Flickerless FL 0 (60Hz) ■■ To set the flickerless
1 (50Hz)