Emerson 115-600V, 115-120, 15-90KVA Mimic Display Indicators, Mimic display status indicators

Operator Control and Display Panel

9.2Mimic Display Indicators

Figure 52 Mimic display indicators location

Mimic indicators

1. Rectifier indicator

2. Battery indicator

3. Bypass indicator

4. Inverter indicator

5. Load indicator

6. Status indicator

EMER SO N 3

TM

Network Power

4

5

2

6

STATUS

1

Mimic indicators show the operational status of the Liebert® APM™ by their color—green, amber or red—and whether they are ON (solid), flashing or OFF. Table 24 provides a guide to interpreting the various states of the indicators.

Table 24 Mimic display status indicators

	Indicator
(see Figure 52)		Green	Flashing Green / Amber	Red	Off
1.	Rectifier	Load on Rectifier	Flashing Green: Utility normal,	Rectifier fault	Rectifier is normal, but utility
			but rectifier not operating		is abnormal
2.	Battery	Battery Powering	Flashing Green: Battery	Battery or battery	Battery and converter are
					normal, and battery is not
		the Load	pre-warning (low battery)	converter abnormal*
					discharging
3.	Bypass	Load on Bypass	—	Bypass out of	Bypass Normal
		Power		normal range
4.	Inverter	Inverter Powering	Flashing Green: Inverter on	Inverter fault	Inverter normal, but Off
		the Load Normally	standby
5.	Load	UPS output On	—	UPS output overloaded	UPS has no output power
6.	Status	No Alarms—UPS	Amber: UPS has a general	UPS has a serious alarm	—
		Working Normally	alarm

*Battery or battery converter abnormal events include these event messages (see Table 1 in Appendix A): No Battery, Battery Replaced, Battery Reverse, Batt. Conv. Over. Curr., Batt. Converter Fault, Batt. Converter Overtemp.

78