MODEL | SECTION 2.0 |
| INSTALLATION |
SECTION 2.0
INSTALLATION
2.1 UNPACKING AND INSPECTION
Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions. If there is no apparent damage, unpack the container. Be sure all items shown on the packing list are present. If items are missing, notify Rosemount Analytical immediately.
The Model
| Model or part number | Description |
|
|
|
|
|
| Model 54eA analyzer |
| |
|
|
|
|
| 2002577 | Mounting bracket for Model 54e, pipe/wall |
|
|
|
|
|
| Cable glands kit for Model 54e, qty 5 |
| |
|
|
|
|
| Model 499ADO oxygen sensor |
| |
|
|
|
|
| Smooth membrane retainer for 499ADO sensor |
| |
|
|
|
|
|
| Handrail clamp assembly (clamp, sensor maintenance kit, and elbow) |
|
|
|
|
|
| Air blast washer head |
| |
|
|
|
|
| Air compressor and enclosure with air hose (115 VAC) option |
| |
|
|
|
|
| Air compressor and enclosure with air hose (220 VAC) option |
| |
|
|
|
|
| Mounting hardware for air compressor enclosure |
| |
|
|
|
|
|
| ||
|
|
|
|
The customer must supply a schedule 80
2.2 INSTALLATION
2.2.1 General information
1.Although the equipment is suitable for outdoor use, do not install it in direct sunlight or in areas of extreme temperatures.
2.Install the equipment in an area where vibrations and electromagnetic and radio frequency interference are minimized or absent.
3.To keep the analyzer watertight, install plugs (provided) in the unused cable openings.
4.Keep the analyzer and sensor wiring at least one foot from high voltage conductors. Be sure there is easy access to the analyzer.
5.Provide room to allow the sensor and attached piping to be removed from the aeration basin for service. A maintenance bracket (part of PN
Figure 2-1 shows the suggested arrangement of the analyzer, air compressor, and maintenance bracket on the handrail.
7
