Instruction Manual

748467-A January 2002

Model MicroCEM

INTENDED USE STATEMENT

The MicroCEM Continuous Emissions Monitor is intended for use as an industrial process measurement device only. It is not intended for use in medical, diagnostic, or life support applications, and no independent agency certifications or approvals are to be implied as covering such applica- tions.

SAFETY SUMMARY

If this equipment is used in a manner not specified in these instructions, protective systems may be impaired.

AUTHORIZED PERSONNEL

To avoid explosion, loss of life, personal injury and damage to this equipment and on-site property, do not operate or service this instrument before reading and understanding this instruction manual and receiving appropriate training. Save these instructions.

DANGER.

ELECTRICAL SHOCK HAZARD

Do not open while energized. Installation requires access to live parts which can cause death or serious injury.

For safety and proper performance this instrument must be connected to a properly grounded three-wire source of power.

DANGER.

POSSIBLE EXPLOSION HAZARD

Do not operate without covers secure. Ensure that all gas connections are made as labeled and are leak free. Improper gas connections could result in explosion and death.

P-2

Preface

Rosemount Analytical Inc. A Division of Emerson Process Management