Model MicroCEM

Instruction Manual

748467-A January 2002

b.Main Display

The MicroCEM Main Display (Figure 3-3)provides the status of the three emissions channels. The status in- cludes the current reading (updated approximately every 2 seconds), the

Drag the edge of the column to resize.

Tools Menu Provides access to all functionality.

Note: Exit is only be available when current user has administrative access.

last 1-minute average, and the last 15- minute average. The status column (Sts) indicates the status of the measurement and can be any of the values in listed in Table 3-1.(“Status” shown in order of precedence. Maintenance mode status takes highest prece- dence.)

S. = Status

See Table 3-1.

Use the scrollbar to see full set of data.

Toolbar Buttons

About

Data Logs

MicroCEM Admin

MicroCEM Settings

Alarms

 

Figure 3-3. MicroCEM Pocket PC Display (Main Display Shown)

 

 

STATUS

DESCRIPTION

M

Indicates that maintenance mode is active.

C

Calibration in process

I

Invalid Reading. Indicates that the reading is invalid due to calibration failure or sensor failure.

V

Valid Reading

P

Customer Process Off Line (Dry contact by customer)

O

MicroCEM System Off

Table 3-1. Status Values

Rosemount Analytical Inc. A Division of Emerson Process Management

Operation

3-3