Model MicroCEM
Instruction Manual
To replace the converter or sensor, disconnect the two pneumatic tubes and two electrical connections. Unlace the heater blanket,
and remove the converter. Reassemble in reverse order, ensuring that the converter is oriented with the glass cloth at the bottom and the sensor is oriented correctly inside the heater jacket.
ASSEMBLED SIDE VIEW
Sensor
Heater Jacket 655228
Converter
Tube 655227
| Wrap with | Sensor |
Glass | aluminum foil | 655282 |
Cloth |
|
|
Figure
Rosemount Analytical Inc. A Division of Emerson Process Management | Maintenance and Service |