Instruction Manual
748467-A January 2002
d.Manual Calibration
A dry-run Calibration may be initiated from the Manual Calibration page of the MicroCEM Settings. The results of the calibration will not be applied and only provide a dry run of the calibration. If desired a partial calibration may be in- voked for one or more of the emission types. While the manual calibration is in process, a calibration progress dialog will be displayed as shown in Figure
3-26.When the manual calibration is completed, the results are displayed in the Manual Calibration Results dialog as shown in Figure 3-12.If the Local Calibration checkbox is checked, the Local Calibration valve will be used during the calibration rather than the probe Calibration valve.
| NOTE | |
| “Start Autocalibration now” will in- | Figure 3-12. Manual Calibration Results |
| voke a real calibration and will apply |
| |
| new correction factor results when | |
| done. | |
Figure 3-11. Manual Calibration
Rosemount Analytical Inc. A Division of Emerson Process Management | Operation | 3-9 |