Instruction Manual
Model MicroCEM
Contact Extraction
1.Remove hardware from plug or re- ceptacle and slide hardware back along wire bundle.
4.Hold wire firmly in tool and extract wired contact and tool. Repeat op- eration for all contacts to be ex- tracted.
2.Using plastic or metal extraction tool with proper color code corresponding to contact size, place wire in tool.
5.Fill any empty wire cavities with wire sealing plugs.
3.Insert tool into contact cavity until tool tip bottoms against the contact shoul- der, expanding clip retaining tines.
6. Reassembly plug or receptacle.
Installation | Rosemount Analytical Inc. A Division of Emerson Process Management |