Model MicroCEM
Instruction Manual
g. Specifications |
|
Analog Inputs |
|
Number of inputs ................... | 32 |
A/D resolution ........................ | 16 bits (1/65,536 of full scale) |
Bipolar ranges ....................... | ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V |
Unipolar ranges ..................... | |
Input bias current................... | 100pA max |
Overvoltage protection .......... | ±35V on any analog input without damage |
Nonlinearity............................ | ±3LSB, no missing codes |
Conversion rate ..................... | 200,000 samples/sec.max |
1K x 8(512 | |
Calibration.............................. | Automatic;values stored in EEPROM |
Analog Outputs |
|
Number of outputs ................. | 4 |
D/A resolution ........................ | 12 bits (1/4096 of full scale) |
Output ranges........................ | ±5, ±10, |
Output current........................ | ±5mA max per channel |
Settling time........................... | 6µS max to 0.01% |
Relative accuracy .................. | ±1 LSB |
Nonlinearity............................ | ±1 LSB, monotonic |
Reset ..................................... | All channels reset to OV |
Calibration.............................. | Automatic; values stored in EEPROM |
Digital I/O |
|
Main I/O ................................. | 24 programmable I/O |
Input current........................... | ±1µA max |
Output current........................ |
|
Logic 0 ................................... | 64mA max per line |
Logic 1 ................................... | |
Auxilary I/O ............................ | 4 inputs, 4 outputs, optional use as trigger/control lines |
Counter/Timers |
|
A/D Pacer clock ..................... | |
| (2 82C54 counters cascaded) |
Clock source.......................... | 10MHz |
General purpose.................... | |
General |
|
Power supply ......................... | +5VD±10%@200mA typ |
Operating temperature .......... | |
Weight.................................... | 3.4oz/96g |
Rosemount Analytical Inc. A Division of Emerson Process Management | Description and Specifications |