Model MicroCEM

Instruction Manual

748467-A January 2002

1-5 CENTRAL PROCESSING UNIT

a. Embedded Enhanced Bios

The CPU is an Embedded Pentium-like AT Computer in 5.75” x 8” form factor. The peripherals integrated on board are: SVGA, 4 serial ports and one parallel port, Fast Ethernet ctrl., IDE, Keyboard, Mouse, 2 USB. The module is built around the Intel Tillamook processor and is equipped with 64MB SDRAM. The module also integrates one socket for SSD that performs like an HDD unit and can be used to store the operating sys- tem, the user’s programs and the data files. Other peripherals available on board are the Floppy disk controller, the parallel port. The CPU is shown in Figure 1-7.

Award, 256KB Flash Bios.The Bios is immediately activated when you first turn on the system. The Bios reads system configuratio information in CMOS RAM and begins the process of checking out the system.

 

Figure 1-7. CPU

b. Specifications

 

Architecture: .................................

PC/AT Compatible

Dimensions: ..................................

5.75” x 8”

Processor: ....................................

Intel Tillamook processor - 266MHz

Memory: ........................................

64 MB SDRAM

Ram/Rom disk: .............................

1 x 32 pin socket (max. 288MB)

Operating System: ........................

WinNT

BIOS: ............................................

Standard with embedded extensions

Interfaces: .....................................

IDE ctrl

 

Floppy ctrl

 

SVGA-CRT

 

10/100 Mbps Fast Ethernet

 

2 USB ports

 

4 RS232 serial ports (one can be 485)

 

Parallel port (bi-directional EPP-ECP)

 

Keyboard PS/2

 

Mouse PS/2

Bus: ..............................................

AT bus according to PC/104 spec.

Power Supply: ..............................

AT/ATX

Connectors: ..................................

COM1-4, SVGA, USB 1 and 2, PS/2 Mouse/Keyboard, ATX Power,

 

Parallel, IDE, Floppy, and Fast Ethernet

Rosemount Analytical Inc. A Division of Emerson Process Management

Description and Specifications

1-9