Instruction Manual
Model MicroCEM
To replace the ozonator, remove the two large straps and all
There are five different personality modules. Depending on your unit, you may have three, four or five modules installed. These person-
ality modules are installed on a custom back- plane. See Figure
To remove any on the personality modules. Remove cables form module to be removed, there are two screws at the bottom of each module. You will have to loosen each screw before you can remove the personality mod- ule.
Tag each cable and its location before disconnecting any wiring. This helps in re- assembly.
EXIO
AUX
PDD
NDIR
PMD
Figure
Maintenance and Service | Rosemount Analytical Inc. A Division of Emerson Process Management |