Instruction Manual

748467-A January 2002

Model MicroCEM

e. Limits

f. Calibration Gas

The emission limits alarms can be set on the Limits page of the MicroCEM Settings. When a measured emission exceeds its limit, the emission will have a limit-exceeded status. This is indicated on the main display and on the Data-Logs display. It is also indicated in the limit exceeded digital output.

The Calibration Gas emissions quantities and Gas Bottle allocation may be set on the Calibration Gas page of the MicroCEM Settings. This should be set whenever a Calibration Gas container is replaced.

Place the span gas value of the particular gas cylinder in the span column. I mid calibration gas can also be hooked up the MicroCEM. Insert its span gas value in the mid span boxes. If a dual range is used use the Mid Span column.

Figure 3-13. Limit Settings

Figure 3-14. Calibration Gas Settings

3-10

Operation

Rosemount Analytical Inc. A Division of Emerson Process Management