Enterasys Networks 2G4082-25 manual Logging in with an Administratively-Configured User Account

Completing the Installation of a New System Pin Out Descriptions

Figure 3-11 Matrix DFE Startup Screen Example (N7 Chassis)

login: admin Password:

M A T R I X N7

Command Line Interface

Enterasys Networks, Inc.

50 Minuteman Rd.

Andover, MA 01810-1008 U.S.A.

Phone: +1 978 684 1000

E-mail: support@enterasys.com

WWW:http://www.enterasys.com

(c) Copyright Enterasys Networks, Inc. 2003

Chassis Serial Number: xxxxxxxxxxxx

Chassis Firmware Revision: xx.xx.xx

Matrix N7(su)->

Logging in with an Administratively-Configured User Account

If the device’s default user account settings have been changed, proceed as follows:

1.At the login prompt, enter your administratively‐assigned user name and press Enter.

2.At the Password prompt, enter your password and press Enter.

The notice of authorization and the Matrix prompt displays as shown back in Figure 3‐11.

Note: Users with Read-Write (rw) and Read-Only (ro) access can use the set password command to change their own passwords. Administrators with Super User (su) access can use the set system login command to create and change user accounts, and the set password command to change any local account password. For information on the set password and set system login commands, refer to the Enterasys Matrix DFE-Diamond/Platinum Series Configuration Guide.

The DFE‐Platinum module is now ready to be configured. For information about setting the IP address and configuring Telnet settings for remote access to DFE management, refer to the Enterasys Matrix DFE‐Diamond/Platinum Series Configuration Guide. The CLI commands enable you to initially set up and perform more involved management configurations.

The Enterasys Matrix DFE‐Diamond/Platinum Series Configuration Guide is available online at:

http://www.enterasys.com/support/manuals

If you require assistance, contact Enterasys Networks using one of the methods described in “Getting Help” on page xiii.

3-16 Installation