1
Introduction
Overview
The Enterasys Networks Wireless Access Point 3000 is an IEEE 802.11a/b/g (RBT3K‐AG & RBT3K‐AG‐G), or an IEEE 802.11b/g only (RBT3K‐1G), access point that provides transparent, wireless high‐speed data communications between the wired LAN and fixed, portable or mobile devices equipped with an 802.11a, 802.11b or 802.11g wireless adapter.
This solution offers fast, reliable wireless connectivity with considerable cost savings over wired LANs (which include long‐term maintenance overhead for cabling). Using 802.11a, 802.11b, and 802.11g technology, this access point can easily replace a 10 Mbps Ethernet connection or seamless integration into a 10/100 Mbps Ethernet LAN.
In addition, the access point offers full network management capabilities through an easy to configure Web interface, and a command line interface for initial configuration and troubleshooting.
The IEEE 802.11a/g standard uses a radio modulation technique known as Orthogonal Frequency Division Multiplexing (OFDM), and a shared collision domain (CSMA/CA). It operates at the 5 GHz Unlicensed National Information Infrastructure (UNII) band for connections to 802.11a clients, and at 2.4 GHz for connections to 802.11g clients.
IEEE 802.11g includes backward compatibility with the IEEE 802.11b standard. IEEE 802.11b also operates at 2.4 GHz, but uses Direct Sequence Spread Spectrum (DSSS) modulation technology to achieve a communication rate of up to 11 Mbps.
The access point also supports a 54 Mbps half‐duplex connection to Ethernet networks for each active channel (up to 108 Mbps in turbo mode on the 802.11a interface).
Kit Checklist
Physically inspect all cartons for shipping damage. Report any damage to your shipping carrier. Also verify that you have received the correct basic components and options listed. Report any discrepancies to your Enterasys Sales Representative.
•RoamAbout Access Point 3000
•RoamAbout Access Point 3000 Hardware Installation Guide
•One RS‐232 console cable
•One 5.1 Vdc power adapter and power cord
•Plastic cover
•Four rubber feet
•Security clip (used with ceiling mount)
•Mounting bracket and two ceiling mount clips
RoamAbout Access Point 3000 Hardware Installation Guide
