Enterasys Networks 3000 manual Using the CLI

Using the CLI

6.Change the default username and password: type username and specify a unique user name; type password and specify a unique password.

RoamAbout 3000(config)#username JadaPerl

RoamAbout 3000(config)#password G7nq1Z

Confirm new password: G7nq1Z

RoamAbout 3000(config)#

7.Enable Management VLAN.

Note: Before enabling the VLAN feature on the access point, you must set up the network switch port to support tagged VLAN packets from the access point. The switch port must also be configured to accept the access point’s management VLAN ID and native VLAN IDs. Otherwise, connectivity to the access point will be lost when you enable the VLAN feature.

a.Type management‐vlanid and specify a management vlanid.

b.Type management‐vlan enable, and reset the access point.

RoamAbout 3000(config)#management-vlanid 10

RoamAbout 3000(config)#management-vlan enable

Reboot system now? <y/n>:y

Username: admin

Password:********

8.Refer to the RoamAbout Access Point 3000 Configuration Guide for advanced configuration information.

3-4 Initial Configuration