Enterasys Networks 3000 - page 40

Using Web Management
3-8 Initial Configuration
b. ClicktheDHCPClient:Disableradiobutton.
AnIPAddresssectionappearsonthepage.
c. SpecifyIPaddress,SubnetMask,DefaultGateway,andPrimaryandSecondaryDNS.
d. ClickApplyatthebottomofthepage.
e. TypetheIPaddressthatyouspecifiedfortheaccesspointinyourbrowser’saddressfield.
Forexample,enterhttp://10.2.101.22/.
TheLoginwindowappears.
f. Entertheusernameadminandthepasswordpassword,andclickLOGIN.
g. ClickAdministrationfromthemenuontheleftofthepage.
TheAdministrationpageappears.
h. ClickResetatthebottomofthepage.
Theaccesspointpromptsyoutoconfirmthatyouwanttorebootthesystem.
i. ClickOK.
Theaccesspointreboots,andtheLoginwindowappears.
j. Entertheusernameadminandthepasswordpassword,andclickLOGIN.
7. Tosettheusernameandpassword,performthefollowingsteps:
a. ClickAdministrationfromthemenuontheleftofthepage.
TheAdministrationpageappears.
b. SpecifyanewusernameintheUsernamefield.