Enviro C-11253 Removal, Secondary Installation, Bushing and Hook Close-Up, Bushing Locations

Secondary Installation

Figure 65: Installing Surround Corners, Keystone, & Covers.

11.Line the ends of the surround corners with the marks from step 9. Move the mounting brackets until the holes on the surround line up with the slots on the mounting brackets. When everything is lined up, secure the surround to the mounting brackets with eight (8) #8 T-20 screws (see Figure 65). Also tighten the eight (8) screws from step 9.

12.Center the keystone over the gap at the top of the trim and slide it into place. Slide the side covers over the bottoms of the sides so the cover will be as low as the trim (see Figure 65).

IMPORTANT: The trim panels or surrounds must not seal ventilation openings in the fireplace.

Surround is

removed for

clarity.

Figure 67: Bushing and Hook

Close-Up.

Figure 66: Bushing Locations.

INSTALLATION:

Lift the trim upright in front of the fireplace with the four (4) hooks pointing towards the fireplace. Slide the hooks over their corresponding bushings (see Figures 66 & 67). Ensure the hooks are secure before releasing the trim. The surround should be wiped with a damp cloth periodically.

REMOVAL:

Lift the trim straight up in order to unhook the notch on the hooks from the bushing. Pull the trim away from the fireplace. Place the trim where it will not be damaged.

33