13. Make sure the rear edge guide of the paper support is
pushed under the output tray as shown below.
Note:
If the rear edge guide is not positioned under the output tray, a
paper jam may occur.
14. When the printer receives data, it advances the continuous
paper to the loading position and starts printing.
Removing continuous paper
1. After you finish printing, press t he Load/Eject button. The
printer advances paper to the tear-off position.
Note:
When the auto tear-off feature is on, the printer advances the
paper perforation to the tear-off position automatically. For more
information on the auto tear-off feature, see “Using the Default-
Setting Mode” on page 8-4.
2-17
LLoire2 Ref. Guide
Rev.c
A5 size Chapter 7
11-11-96 DR, pass 0
7-14 Paper Handling