6. Release the sprocket units on the tractor by raising the
sprocket-lock levers.
7. Move the sprocket units to match the paper’s width, then
position the center support midway between the two
sprocket units.
8. Open both sprocket covers.
9. Make sure the printable side of the paper is up. Then fit the
first four holes of the paper over the sprocket pins and
close the sprocket covers.
L102
L102-2
LLoire2 Ref. Guide
Rev.c
A5 size Chapter 7
11-11-96 DR, pass 0
7-12 Paper Handling