Problems and Solutions This section divides p rinter problems into si x categories:
Power supply . . . . page 10-7
Operation . . . . . . . page 10-8
Paper handling . . . page 10-16
Printing quality . . . page 10-25
Printer utilities . . . . page 10-32
Interface . . . . . . . page 10-33
Go to the category for the type of problem you have and look
for the description that most closely matches the problem. Th e
most likely causes and solutions are listed first, so try them in
the order that they are written until the problem is solved.
Power supply
The lights come on brie fly, but then go off and stay off.
Cause What to do
The printer’s voltage ratin g
may not match the voltage of
your electrical outlet.
Check the printer’s voltage rating and
the outlets voltage rating. If the
voltages do not match, unplug th e
printer immediately and cont act your
dealer.
Warning:
Do not reconnect the power cord to an
electrical outlet that does not have the
matching voltage.
10
Troubleshooting
R
Loire2 Ref. Guide
Rev.c
A5 size Chapter 10
11-11-96 DR, pass 0
Troubleshooting 10-7