Installing the software while running Windows 95
If you had trouble installing t he printer software using the
plug-and-play feature, follow t hese steps to install the so ftware:
1. Make sure Windows 95 is running and the printer is on.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Click Install in the dialog box t hat
appears, shown below.
If this dialog box does not appear when you insert the printer
software CD, double-click the My Computer icon, then
double-click the CD-ROM dr ive icon (or floppy disk drive
icon if using the floppy disk version). If the dialog box
shown above still does not appear, double-click the
Setup.exe icon. You may need to use the arrows to scroll
through the folder to find it.
Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, click the Driver disk creation
utility button and follow the on-screen instructions.
cdinst
LLoire2 Ref. Guide
Rev.c
A5 size Chapter 2
11-11-96 DR, pass 0
2-16 Getting Started