Using the printer’s control panel buttons
If you can not use the print head alignment utility program that
came with your printer, then follow these steps to align the
print heads.
1. Make sure that the printer is off and paper is loaded in the
sheet feeder.
cCaution:
Use paper at least 210 mm (8.27 inches) wide; for example, A4
size paper loaded short edge first. Otherwise, the print heads
will spray ink directly onto the platen.
2. Hold down the Pause button and turn on the printer to enter
the print head alignment mode. Release the buttons.
The printer prints an in struction sheet in Engl ish, French,
German, Italian, Spanish, and Portuguese that shows you
how to align the print heads. Follow these instructions.
3. After aligning the print heads, exit the print head alignment
mode by turning off the printer.
LLoire2 Ref. Guide
Rev.c
A5 size Chapter 10
11-11-96 DR, pass 0
10-42 Troubleshooting