Maintaining the Projector 121
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the Menu button on the remote control or on the
projector’s control panel. You see the main menu.
2. Use the buttons on the remote control (or the arrow buttons
on the projector) to highlight Reset, then press Enter.
You see this screen:
3. Select Reset Lamp Hours and press Enter.
4. When you see the prompt, select Yes and press Enter.
5. When you’re finished, press Esc or Menu to exit the Menu
system.