Connecting to Computers, Cameras, and Other Equipment 47
Connecting a Component Video Source
You will need a component-to-VGA cable, or a component video
cable and adapter, for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page12 for
more information.
1. Locate a component-to-VGA video cable or adapter.
2. Connect the cable to your player and the blue Computer
(Component Video) connector on the projector. If you’re using
an adapter, connect it to a standard component video cable as
shown below.
3. If you want to play sound through the projector, see page50 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
Search button on the remote control or the Source Search
button on the projector’s control panel.
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or Component
Video (see page10 3).
Component-to-VGA cable
(ELPKC19)
Component-to-
VGA adapter
Component
video cable