Setting Up Network Projection 57
Configuring the Connection
You can use NS Connection to connect to the projector and send
images wirelessly in two modes: Ad Hoc mode or Access Point mode.
■Ad Hoc mode (computer-to-computer mode) lets you connect
just one computer to the projector at a time; it’s easy to set up,
and the only equipment you need is a computer with a wireless
(802.11g, 802.11b, or 802.11a) network card or adapter, or a
Macintosh® with an AirPort® or AirPort Extreme card. When
you connect with this mode, any connection to other wireless
networks is broken; you can connect to the projector only.
■Access Point mode (infrastructure mode) lets multiple computers
access the projector at the same time and easily trade off control
over the projector. To use Access Point mode, you need a wireless
(802.11g, 802.11b, or 802.11a) access point or an AirPort
Extreme (or AirPort) base station, and one or more computers
with wireless network cards or adapters.
Follow the instructions below for the mode you want to use.
note
Make sure you’ve installed
the NS Connection software
as described in the EasyMP
Operation Guide.
To connect to the projector
over a wir eles s ne twor k, yo ur
computer must be running
Windows 2000, XP, or
Vista. Your Mac must be
running Mac OS X 10.3 to
10.5. See the EasyMP
Operation Guide for
complete system
requirements for projecting
wirelessly.
Access Point mode
(infrastructure mode) is
required to achieve transfer
speed s up t o 54MB /sec on an
802.11g network. Ad Hoc
mode (computer-to-
computer mode) limits
network connections to
11MB/sec. This is a
standard specification of
802.11g networking.