Setting Up Network Projection 83
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. When you’re done making these settings, highlight the Return
button at the top of the screen, then press Enter. Choose Setup
Complete and press Enter, then choose Yes and press Enter to
save your settings.
Enabling WPA Security
1. Press the Menu button, highlight Network, and press Enter.
2. Choose Network Configuration and press Enter.
3. Highlight Security, then press Enter. You see the following
screen: