Setting Up Network Projection 93
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is EPSON Projector. The e-mail includes the following
information:
■Line 1: The name of the projector where the problem has
occurred
■Line 2: The IP address of the projector where the problem has
occurred
■Line 3: Details of the problem
Using SNMP to Monitor the Projector
Network administrators can use SNMP (Simple Network
Management Protocol) to monitor projectors.
1. Press the Menu button on the remote control, select the
Network menu, then press Enter.
2. Choose Network Configuration and press Enter.
3. Choose Others, then press Enter. You see the following screen:
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP ad dres s. Th is le ts yo u
receive trap alerts for the
projectors you’re monitoring.