Solving Problems 127

Viewing Lamp Usage and Other Information

Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
Press the Menu button and highlight the Info menu.
You see the lamp usage hours and various input signal settings on the
right.
The life span of the lamp is up to 3000 hours if the Brightness
Control setting in the Setting menu is set to High (default), and up to
4000 hours if the Brightness Control setting is set to Low. Make
sure you have a spare lamp handy if the usage hours on this menu are
close to the life span of your lamp.
Solving Projector Operation Problems

The power doesn’t turn on.

■If the projector doesn’t turn on when you press the PPower
button, make sure the power cable is connected to the projector
and plugged into a working electrical outlet.
■The power cable may be defective. Disconnect the cable from the
outlet and contact Epson as described on page 137.
■Check to see if the A/V Mute slide is closed.
■Check the status lights (see page 125).

The buttons on the projector don’t work.

If the control panels buttons have been locked, try using the remote
control instead. See page 110 for information about locking the
control panel.
note
The information displayed
depends on the input signal
currently selected.