Epson 1716 Using Access Point Mode

64 Setting Up Network Projection

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your projector

and wireless access point or AirPort base station settings as described

in this section.

1. Press the Menu button, then choose Network and press Enter.

2. Choose Network Configuration and press Enter.

3. Choose Wireless LAN and press Enter. You see this screen:

4. Make sure Advanced is selected for the Connection mode. If

not, use the buttons on the remote control to highlight

Advanced, then press Enter to select it.

5. If your network is using 802.11a, use the buttons on the

remote control to highlight 802.11a, then press Enter to select it.

6. To enable your computer to find the projector on the network,

you need to enter the SSID name of your access point or the name

of your AirPort network in the SSID text box. (The name of your

AirPort network may be different from that of your AirPort base

station; select your base station in the AirPort Admin utility and

click Configure to check the name of your network.)