82 Setting Up Network Projection
4. Press Enter to show the menu, then highlight WEP and press
Enter.
5. For the WEP encryption setting, highlight 128Bit or 64Bit and
press Enter.
6. For Format, highlight ASCII to enable text input or HEX to
enable hexadecimal input, then press Enter.
7. If you chose 64Bit, choose Key ID 1, 2, 3, or 4.
Highlight the Encryption key text box that corresponds to the
Key ID you selected, then press Enter. Use the buttons to
select individual letters; then press Enter to input a character. To
add a blank space or to navigate backward and forward through
the input text, highlight the arrows and press Enter. To toggle
symbol settings or capital letters, highlight the option and press
Enter. When you’re done, highlight Finish and press Enter.
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn’t work,
try Text2 and then Text3.