Epson 1716 Selecting the Image Source

18 Displaying and Adjusting the Image

This projector incorporates Instant Off technology. To turn it off, you

can press its PPower button as described below, unplug it, or turn

off a power switch that supplies power to the projector. You don’t

have to wait for the projector to cool off first.

1. To turn off the projector, press the

PPower button on the remote

control or projector.

You see a confirmation message.

(If you don’t want to turn it off, press any other button.)

2. Press the PPower button again. The projection lamp turns off

and you can unplug the power cord.

If you want to turn the projector on again, make sure the orange

Ppower light is not flashing, then press the PPower button.

3. If you extended the adjustable front foot, press up on the foot

release lever to retract it.

4. Close the A/V Mute slide.

Selecting the Image Source

Selecting the image source lets you switch between images input from

different pieces of connected equipment (such as a computer or DVD

player).

If you don’t see the image you want, press the Search button on the

remote control or the Source Search button on the projector until

you see the image you want to project.

note

Lamp life will vary

depending on mode selected,

environmental conditions,

and usage.

Turn off this product when

not in use to prolong the life

of the projector.

note

To focus and adjust the

image, see page21. If a

projected image fails to

appear, see page19 for help.