Epson 1815p Menu, Mail, , and, Enter, Enter, Network, Press the, , as needed, and enter the projector’s, 2.Choose To Network Configuration and press Enter

■If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, Gateway Address, and DNS Servers, as needed.

To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press the Enter button.

8.When you’re done making all necessary changes, select Return, select Setup complete, and then select Yes to confirm that you want to save the changes. Press Menu to exit the menu system.

note

If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring.

Using Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if it has any problems.

1.Press the Menu button on the remote control, select the Network menu, then press Enter.

2.Choose To Network Configuration and press Enter.3.Choose Mail, then press Enter. You see the following screen:

note

You can also set e-mail alerts from EMP Monitor (see page 147).

Managing Projectors 137