Epson 1815p 82Presenting Through a Wireless Network, If you see a message asking you to disable the firewall, click

note

If you don’t see your network adapter’s IP address, allow a minute for it to appear. If your access point or AirPort base station uses DHCP (Distribute IP addresses setting is enabled for AirPort), sometimes it takes a minute for the server to pick up the IP address.

Once you’ve selected the IP address for your network adapter, you won’t see the Switch network dialog box when you start

NS Connection. If you want to change to a different network adapter, click Extension on the EMP NS Connection dialog box, then click Switch LAN on the extension dialog box.

3.The first time you start NS Connection, you see this dialog box. Choose a connection mode and click OK.

4.If you see a message asking you to disable the firewall, click Yes to make an exception for the projector and allow projection.

You see the screen below. (If you have previously started NS Connection, this may be the first screen you see.)

Select projector

82Presenting Through a Wireless Network