4.Make sure Quick is selected for the Connection mode. If not, use the pointer button on the remote control to highlight Quick, then press Enter to select it.

5.If your network is using 802.11a, use the pointer button on the remote control to highlight 802.11a, then press Enter to select it.

6.If your computer’s network card supports an SSID or ESSID name (see page 63), highlight the ESSID text box, press Enter, and enter a name:

Press the pointer button to select individual letters; then press Enter to input a character. To add a blank space or to navigate backward and forward through the input text, highlight the arrows and press Enter. To toggle symbol settings or capital letters, highlight the option and press Enter. When you’re done, highlight Finish and press Enter.

Note that the ESSID is case-sensitive (if you enter the name in uppercase on the projector, you must type it the same way on the computer connecting to the projector).

7.When you’re done making these settings, select Return, select Setup complete, and then select Yes to confirm that you want to save the changes. Press Menu to exit the menu system.

Now you’re ready to set up your computer to project wirelessly. Go to “Configuring the Network Settings for Windows” below, or “Setting Up Your Mac for Ad Hoc Mode” on page 63.

60Presenting Through a Wireless Network