Follow these steps to turn on the projector:1. Open the A/V mute slide (lens cover).

note

You can set the projector to automatically turn off the projector lamp and enter “sleep mode” when it has not received any signals for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P Power button. If you are done using the projector, unplug the power cord. To enable sleep mode, see page 132.

2.Plug one end of the power cable into the projector, and the other end into an electrical outlet.

The Power light turns orange.

Power light

18Displaying and Adjusting the Image