H-Keystone

You can manually adjust the shape of the image to compensate for vertical and horizontal keystone distortion. First make sure the Keystone setting in the projector’s menu system is set to

or V-Keystone:

1.Press the Menu button on the remote control (or on the projector’s control panel).

2.Select the Settings menu and press Enter.

3.From the Settings menu, select Keystone and press Enter.

4.Select H/V-Keystoneand press Enter.

5.Select H-Keystone(for horizontal adjustment) or V-Keystone(for vertical adjustment) and use the l and r arrow buttons to adjust the shape of the image.

Vertical keystone adjustment

Horizontal keystone adjustment

If the image becomes smaller, use the zoom ring to enlarge the image so it fits the screen. If the image contains faint lines or a gridlike pattern, decrease the sharpness setting (see page 123).

Selecting the Color Mode

The Color Mode adjusts the brightness, contrast, and color for various common viewing environments. Use this setting to quickly obtain a good picture.

note

The projector’s arrow buttons may already be in Keystone correction mode if you haven’t used Quick Setup or Quick Corner.

Displaying and Adjusting the Image 27