You see vertical bands or the image still looks blurry after trying the solutions in the previous section.

If you’re projecting from a computer and displaying an image that contains a lot of fine detail, you may notice vertical bands or some of the characters may look heavy or blurred. Press the Auto button on the remote control or the Enter button on the projector to reset the projector’s Tracking, Sync, and Position settings.

If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Signal menu, as described on page 125.

1.Fill the screen with an image containing fine detail, such as a pattern to appear as your desktop background, or try projecting black text on a white background.

2.Adjust the Tracking to eliminate vertical bands.3. Adjust the Sync setting to increase the image sharpness.

note

You must be projecting an image for this button to have any effect. The Auto button works only with computer images projected through the VGA port.

The image is too light or dark, or colors are incorrect.

Use the Color Mode option in the projector’s Image menu to adjust the color (see page 122).

If you’re displaying video, adjust the Color Adjustment and Color Mode settings on the Image menu. You can also try adjusting the Color Saturation, ABS Color Temp, and Tint settings on the Image menu.

note

Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.

Solving Problems 171