Epson 1815p EasyMP, 56Presenting Through a Wireless Network, Otherwise, continue with the next section, Use only the Epson 802.11a/b/g wireless module in the projector

note

Use only the Epson 802.11a/b/g wireless module in the projector.

If you see a message asking you to insert a LAN or memory card, check to make sure your 802.11 a/b/g module is properly inserted (see page 52).

Starting EasyMP

Before connecting to the projector, you have to switch it to EasyMP mode. Follow these steps:

1.Point the remote control at the projector and press the P Power button.2.Press the EasyMP button on the remote control to select EasyMP as the source.You see this screen. The network settings appear in the lower left.

3.If you’ve already set up your computer and projector for the mode you want to use—Ad Hoc mode (also called computer-to- computer mode) or Access Point mode (also called infrastructure mode)—skip to “Projecting Over a Network” on page 81.

Otherwise, continue with the next section.

56Presenting Through a Wireless Network